Skip to content

How to Fix QuickBooks Error Code 80070057? (The parameter is incorrect)

QuickBooks Error Code 80070057

QuickBooks Error Code 80070057 occurs when a user tries to open a company file. In most cases, the user enters the incorrect authentication details, so the company file doesn’t launch properly. Another reason is that the user hasn’t installed the latest updates that address this error in particular and resolve it permanently in their desktop software.

If there are certain restrictions on the windows user account, then the user must log in via an administrator account, then run the software as an administrator so that the accounting software has enough privileges to execute certain functions and open the company file.

Company files and their location errors can also cause QuickBooks Error Code 80070057, so QuickBooks file doctor, a free utility, may be used for scanning the company file and ensuring that it’s working properly.

Any errors found with the data will ultimately cause data loss unless you use a utility to resolve such an error or get in touch with an accounting software expert.

In this post, you’ll learn how to fix QuickBooks Error 80070057.

Note: some of the solutions require you to have admin rights for windows accounts. Further, you may have to switch to the single-user mode for some solutions.

What is QuickBooks Error Code 80070057?

One of the most prevalent QuickBooks problems is Error Code 80070057, which indicates that a parameter is incorrect, particularly when the company file is accessed. This error code means that you do not have sufficient authorization to read/write and create/remove the files. Sometimes, it can be very much frustrating for users to deal with this error but you need not worry! You can choose quick, easy, and efficient troubleshooting methods that are going to be discussed in this article that help you to easily get rid of QuickBooks Error Code 80070057.

Causes of QuickBooks Error Code 80070057

The following are possible causes that lead to QuickBooks error 80070057:

  • QuickBooks is not able to read the company file If you have changed your file extension.
  • Incomplete installation of QuickBooks software.
  • Using the wrong QuickBooks extension like- .qbb,.qbm,.qbx for windows file extension.
  • Windows firewall is blocking QuickBooks.
  • Also, if you are opening or creating a portable company file before opening QB.
  • .ND file gets damaged or corrupt somehow
  • It happens when the company file extension has been changed and then this kind of QuickBooks might be found 
  • Sometimes, the third-party firewall may not be configured properly 
  • The devices and computer has some connectivity issues when you’re trying to open QuickBooks company file in some other folder 
  • You are always trying to open the company file by double-clicking when you should be open from inside the QuickBooks Desktop.

Signs and symptoms of QuickBooks Error Code 80070057

When the error occurs, you may get the following prompts of error code 80070057 on your computer screen:

  • A message pops up on your screen 
Exact Error Shown while QuickBooks Error Code 80070057 occurs
  • You can identify this error if your company suddenly get collapsed 
  • System frequent freezes are another symptom 
  • User not having permission to create or delete the company files
  • The system often crashes repeatedly or sluggish system response.

Variations of QuickBooks Error Code 80070057

This error can be caused by various reasons and it can have different variations:

1. Variation One:

Because of QuickBooks error code 80070057, sometimes you face the error message “There was an unexpected error reported while trying to run QuickBooks”. This error message can occur when your company file has any damage or corruption and you want to take back up of the file. The damaged installation file of QuickBooks can also be a cause of this problem.

2. Variation Two:

This QuickBooks error code 80070057 can also cause the error message “You do not have sufficient permissions to delete files”. This error can be caused when you want to launch QuickBooks by opening the .qbw file directly. It can also be caused when Bitdefender tries to block any port that QuickBooks used to exchange data.

3. Variation 3 and 4:

In the third variation, this QuickBooks error code 80070057 can cause the error message “There was an unexpected error reported while trying to run QuickBooks with company file”. In the 4th variation of this error code, the system will show the error message that the parameter is incorrect. This error may occur when the user clicks on any QBB, QBM, QBW, ND, or TLG file. So these are different errors that are faced by QuickBooks users because of this QuickBooks error 80070057.

Troubleshoot Steps to Fix QuickBooks Error Code 80070057

Well, you have already explored the symptoms and the possible causes behind the occurrence of error code 80070057. It’s time to look for the best ways to amend this error quickly so that you can get back to working on QB as before. 

💠 Verify your company file extension name
💠 Open up the company file properly
💠 Download and run QuickBooks File Doctor Tool
💠 Run QuickBooks Desktop as a system administrator
💠 Update your QuickBooks Desktop with the latest release
💠 Perform QuickBooks Clean Installation
💠 Configuring the BitDefender
💠 Configure the Firewall Settings
💠 Go to the Company file to the default location
💠 Manually resolve QuickBooks Error Code 80070057

The below are a few suggested methods, you can easily carry out one by one to fix your error:

Total Time: 40 minutes

Step 1: Verify your company file extension name

Verify your company file extension name

The steps involved in this process are as follows:

💠 First, right-click on the QB company file 
💠 Next, go to the Properties tab and click on the QuickBooks tab 
💠 Here, note down the file extension from the filename field along with the QB version in the last opened with a file 
💠 In the end, hit the “Ok” button.

Steps to Change the extension 

💠 You have to create a new folder to change the file extension name 
💠 Next, copy the company file and paste it into your newly created folder 
💠 After that, perform right-click on the new folder and select “Rename” 
💠 Change the QuickBooks file extension name with .qbm
💠 To save the changes anywhere, simply click “Save” 
💠 Now, you’re supposed to restore the portable file by clicking on the QuickBooks Desktop 
💠 If you find difficulty then need to rename the file extension name to .qbb 
💠 Open the QuickBooks and then try to restore backup 
💠 In case, if you’re still not able to open the file then you’re supposed to rename the extension to .qbx 
💠 To end this process, open the QuickBooks convert to an accounting copy. 

Copy the company file and paste it to another folder in a flash drive

💠 Open Windows Explorer by opening your QuickBooks 
💠 Go to the File menu then make right-click and select the new folder icon 
💠 Copy the company file .QBW out of the flash drive and paste it into a new folder 
💠 Finally, launch the QuickBooks Desktop and try to open a new folder. 

Step 2: Open up the company file properly

Open up the company file properly

Open up the company file properly

This error code can be prevented if the company file is opened appropriately. As a result, the first step is to open the company file appropriately.

The following are the steps involved in this procedure:

💠 Initially, open the QuickBooks Desktop 
💠 Select the Company File 
💠 And then click on the Open button 

Make a note that the file is located on a remote system and make sure that you learn the process to access it correctly.

Step 3: Download and run QuickBooks File Doctor Tool

Download and run QuickBooks File Doctor Tool

If the first two ways didn’t work, you can try downloading and running the QuickBooks file doctor tool.

The following are the steps involved in it:

💠 In the very first step, close QuickBooks Desktop 
💠 Next, download the QB Tool Hub file and then save it to your system 
💠 Now, double-click on the QuickBooksToolHub.exe file to open the same
💠 Perform instructions that appear on your screen to install and also agree to the terms and conditions
💠 Make double-click on the icon and then open the QuickBooks tool hub 
💠 After that, move to the company file issues tab 
💠 Moving forward, select the option Run QuickBooks File Doctor
💠 From the drop-down menu, select the Company File within the File Doctor 
💠 In case, if you’re not able to find the company file then select Browse 
💠 Look for the option to find the company file 
💠 Select the check your file option and then click “Continue” 
💠 Enter the QuickBooks admin password followed by choosing “Next” 
💠 In the last step, open QuickBooks and the company file to verify whether the issue has been fixed or not.  

Step 4: Run QuickBooks Desktop as a system administrator

Run QuickBooks Desktop as a system administrator

Run QuickBooks Desktop as a system administrator

As a system administrator, you can also use QuickBooks Desktop. This might help to solve the problem to some extent.

The following measures are to be taken:

💠 To start with closing your QuickBooks Desktop 
💠 Do right-click on the QB icon and select the option “Run as an Administrator” 
💠 After done with that, if the company file still does not open automatically 
💠 Finally, select the company file and then select “Open”.

Step 5: Update your QuickBooks Desktop with the latest release

Update QuickBooks desktop to Latest

Update your QuickBooks Desktop with the latest release

You can also update the QuickBooks program to the most recent version to resolve the problem. Many times, such issues are caused by an old version of the software.

The following are the steps involved in this procedure:

💠 Go to the Help menu and click “Update QuickBooks”
💠 Next, start the tab “Update Now” and select “Reset Update” 
💠 If you want to delete/remove an earlier update downloads 
💠 Select the option “Get Updates” and again select the “Start QuickBooks” option 
💠 In the end, verify whether the error is fixed or not. 

Step 6: Perform QuickBooks Clean Installation

Perform QuickBooks Clean Installation

Perform QuickBooks Clean Installation

If none of the problems are resolved, you can just install QuickBooks from scratch. The software must be uninstalled and then reinstalled. It might assist you to get rid of the issue to a big part by removing technical obstacles. So, try a clean install or utilize the clean install tool.

Step 7: Configuring the BitDefender

Configuring the BitDefender

Configuring the BitDefender

The BitDefender configuration step is optional because not every user has BitDefender. If you’re using BitDefender, it might be able to help you solve the problem.

The following are the steps involved:

💠 First, navigate to the BitDefender 10.0 menu and select “Antivirus program” 
💠 Visit the custom level opt and from the scan, select the exclude path 
💠 In the next screen, select the option “new item” 
💠 To end this process, select the “Mapped drive or UNC path” that is used to browse the company file.

Step 8: Configure the Firewall Settings 

Configure the Firewall Settings 

Configure the Firewall Settings

Many times, the firewall and other security services can obstruct the software’s smooth operation. This necessitates the configuration of the firewall settings.

You can configure firewall settings by following the steps below:

💠 Initially, add exceptions within the Firewall
💠 After that, follow on-screen instructions or the instructions of firewall provider to change the firewall settings 
💠 It will allow you to send and receive the data 
💠 In the end, uninstall and reinstall the firewall and verify whether the issue still exists or is resolved. 

Step 9: Go to the Company file to the default location

Company file to the default location

Go to the Company file to the default location

Another option is to restore the company file to its default location. If the company file is saved somewhere else, you must relocate it to the default location.

The following are the steps involved in this process:

💠 To start with closing the QuickBooks Desktop 
💠 Next, do a right-click on the company file and then select the Copy option 
💠 Browse to the default location and again do a right-click then select “Paste” 
💠 Select the location C:/Users/Public/PublicDocuments/Intuit/QuickBooks/Company Files
💠 After done with that open the QuickBooks Desktop and select the option “Find a company file” 
💠 Select the local drives and find the company file name 
💠 In the end, select the correct company files and then click “Open”. 

Step 10: Manually resolve QuickBooks Error Code 80070057

Manually resolve QuickBooks Error Code 80070057

If none of the aforementioned approaches were successful in resolving the problem, it is recommended that you try a few manual procedures to permanently remove error 80070057. The following are the steps involved in this procedure:

Step 1: Change the name of .ND files

The steps involved in this case are as follows:

💠 Browse the location of the company file 
💠 Next, find the corresponding .ND file 
💠 After that, do a right-click on the .ND file and select “Rename” 
💠 Rename the file name by typing .old at the end of the file name. 
💠 It’s worth noting that if you’re using QuickBooks in multi-user mode, you can move to the next steps.

Step 2: Run the QuickBooks Database Server Manager on the server 
The steps involved in this process are as follows:

💠 Download and install the QB Tool Hub and then select “Network Issues” 
💠 Click “QuickBooks Database Server Manager” in the next step 
💠 In case, QB is not installed on the server and then you’ll be prompted to install the same 
💠 After that, select the option to “Start Scan” which you found inside the QuickBooks Database Server Manager” 
💠 If the company file folder gets displayed 
💠 In case, they do not then browse the location of the company file and click “Start Scan”. 
💠 To end this process, select the Close button.

Alternative Solution to Fix QuickBooks Error 80070057 (Then parameter is incorrect)

Below are the mentioned alternative solutions to fix QuickBooks error 80070057, follow all the solutions carefully:

Solution 1: Optimally Use the QuickBooks Database Server Manager

QuickBooks Database Server Manager
  • The first step is to locate the network issues in the tool hub 
  • Then, you have to select the QuickBooks database server manager. Then the user needs to install the QuickBooks on the server in any case if pre-installed. 
  • The step is to choose the Start scan option inside the QuickBooks database server manager. In another case, if the company file is spotted. In another, the user is unable to find the company file that browses the location of the company file. Hit the click on the Start scan option.
  • After this, the user is required to view the QuickBooks software and then move forward to sign in to the company file again
  • In another case, it creates the network data files on the server to enable the company files to access them from the varied workstations 
  • Firstly, you have to rename the ND and TLG files by hitting right-clicking on the company file
  • Press the Windows + R keys together 
  • Then, you have to insert a service. MSC the Run-box
  • Press the Enter key and then view for the QuickBooks Database Server manager service
  • Hit the right-click on the Restart service 
  • Once you have been done, check and verify whether the service starts running accurately and if the QuickBooks issue is resolved or not.

Solution 2: Delete & Edit The .ND File

Delete & Edit The .ND File
  • First of all, Click on the Windows Icon on the left bottom of your desktop or simply hit the window button on your keyboard.
  • Now type the Quickbooks Database Server Manager & choose it.
  • Now click on Add folder & find the folder which is storing company files.
  • Once you’re finished with adding folders, click on scan
  • Under the quickbooks company files found, the files appear, now click on close.
  • Containing the company files, browse to the folders and make sure the file .band was created for each company data file.

Solution 3: Use the Disk Cleanup to clean the System’s Junk Files

  • Press the Windows Start tab and then enter the “command” in the search dialogue box 
  • Make sure that you do not hit the “Enter” button yet!
  • Next, press the Ctrl + Shift keys from your console and then hit the “Enter” key 
  • It will redirect you to the permission dialog box and then select the “Yes” button 
  • Now, the command prompt window appears, and enter the “cleanmgr” within the same window then hit the “Enter” key 
  • Disk Cleanup utility tool will begin analyzing disk space that is already occupied and space that can be reclaimed 
  • Checkboxes appear on Windows with categories of files/folders that can be deleted 
  • Usually, “Temporary Files” involve most of the space that is present on the disk 
  • Select the categories checkboxes that you want to clean 
  • And finally, click on the “OK” button.

Solution 4: Sync the Windows Date and Time

  • On your Windows desktop
  • Right-click on the system clock that is on the bottom right side of the window
  • From options, click the option Adjust Date/Time
  • Further, click on the Change date and time
  • Then click on the OK button twice
  • You have to close the QuickBooks software
  • Then again open it
  • Now try to update QuickBooks Desktop.

Solution 5: Use the System File Checker Tool

  • Click on the “Start” button
  • Then, go to the search bar and write “Command Prompt”
  • Hit the right-click and the command prompt will appear on your screen
  • Choose the “Run as an Admin” option
  • Enter the password if it is required 
  • Now, you have to write “Sacnnow/SFC” in the command prompt window 
  • Proceed forward and hit the Enter key 
  • The System file checker tool will detect and correct all damaged files 
  • Once the program is completed and you are all fixed with this error.

Solution 6: Run the System File Checker (SFC) and DISM scans

  • To get started, go to the Windows Start menu
  • Do right-click on the Command Prompt from the search results and type CMD in the search bar
  • Choose the option to run as an administrator
  • Alternatively, you can use the WinX menu to enter Command Prompt with admin access (press the Windows logo + X shortcut)
  • Select Command Prompt (Admin) from the list and click on the same
  • Press the Enter key on your keyboard after typing or pasting sfc /scannow into the window
Important: Note that "sfc" and "/scannow" are separated by a space
  • Allow time for the scan to finish and it’s possible that the procedure will take some time
  • Your computer should be restarted.

It’s possible that System File Checker (SFC) won’t be able to repair all of your system files. If the issue “Another installation in progress” persists, try using the DISM (Deployment Image Servicing and Management) tool:

  • To access the WinX menu, press the Windows logo + X shortcut
  • Choose Command Prompt (Admin) from the drop-down menu
  • Enter the command line below and click Enter:

DISM /Online /Cleanup-Image /restore health 

  • Allow time for the scan to finish
  • Run the SFC scan again when the DISM scan is completed, as shown earlier
  • Finally, restart your system to see whether the problem has been fixed or not. 
Professional services to solve QuickBooks error 80070057:

When you face this issue in your QuickBooks tool, you always want to get a permanent and quick solution to such errors. If you are unable to get rid of this error manually, you can CALL NOW to get a good solution for such errors. It is very easy and fast to contact these professional technicians. You can easily search for these services online and can get instant solutions for all these kinds of QuickBooks error code 80070057. You will not need to face such issues and errors in your QuickBooks tool anymore because they will help you in the best way to find a permanent solution to these issues.


  1. What is QuickBooks error code 80070057?

    This error code is one of the irritating issues that usually appear when a user tries to open the QuickBooks company file. This issue happens due to incorrect parameters in QuickBooks and it means the user can’t get enough permission to remove the files from the specific folder.

  2. How do I fix the QuickBooks error 80070057?

    QuickBooks users make sure about sufficient permission to fix this error. So, it will run without any interruption. The initial step is to close your QuickBooks and hit the right-click on the QuickBooks icon and choose Run as administrator. If you are unable to open the company file automatically then open the company file and you are all resolved with this error.

  3. What are the reasons behind the QuickBooks error 80070057?

    This error leads to being unable to open your company file, it happens when you change the company file extension. This issue also occurs due to the damaged installation of QuickBooks software. When you use a third-party firewall that is not configured properly, you might be encountered with this error code.

Was this worth your time?

This helps us sort answers on the page.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Speak to A Specialist about QuickBooks Software

Headache🥺. Huh, Save time & money with QuickBooks Support 24×7 @ +1/, we provide assistance to those who face problems while using QuickBooks (Support all U.S. & Canada Editions)

--- Support - We provide solutions for the following QuickBooks (Pro, Premier, Accountant, Enterprise, Payroll, Cloud) ---

  • Error Support
  • Data Import
  • Data Conversion
  • Payment Solutions
  • Upgradation
  • Payroll Support
  • Data Export
  • Software Integration
  • QuickBooks Printer Support
  • Complete QuickBooks Solutions
  • Tax-Related Issues
  • Data Damage Recovery
  • Installation, Activation Help
  • QuickBooks Windows Support

Disclaimer : We are a third party agency working on providing authentic support and full fledged services for for accounting software QuickBooks 2018 version. It is one of… Read more



Bigxperts Tollfree Number